Site Content

Additional Information

https://sealmaster.net/products/pavement-sealers/l.               Products

Menu

ASPHALT SEALCOATING

PROTECT & BEAUTIFY ASPHALT PAVEMENT

" target="_blank">https://sealmaster.net/wp-content/uploads/what-is-asphalt-pavement-1.png"/>

Asphalt Sealcoating is the Smart Choice for Pavement Preservation.

Asphalt pavement is mostly rock and/or stone and gravel, along with a binder. The rock, or aggregate, is held together with this binder known as asphalt cement. Maintaining this binder is essential in prolonging the deterioration of asphalt surfaces. Rain, U.V. rays, and chemicals, as they are introduced into the asphalt, will degrade the binder and thus begin the degradation process of the asphalt. This will continue and create a surface that turns brittle. So, the purpose of asphalt sealcoating is to protect the asphalt pavement and to beautify at the same time. The earlier an asphalt sealer can be applied in the life cycle of asphalt the better.

Sealcoating Increases Pavement Service Life

To reduce the effects of the above-mentioned elements, it is important to implement a maintenance program that utilizes sealcoating to extend the life of your parking lot or driveway. Sealcoating will provide a layer of protection blocking out harmful intrusions such as water, oils, and U.V. damage. In addition, when asphalt sealer is applied to manufacturers’ specifications, sealcoating provides a slip-resistant surface with a deep black finish that beautifies the parking lot or driveway. Asphalt sealers are typically bituminous based products or acrylics. The sealcoat is in a liquid formulation of one of the above emulsions, mixed with water, silica sand, polymer additives, and other proprietary fillers and solids. These products can be applied by brush, spray or squeegee.

A regularly scheduled sealcoating program will more than double the life of the asphalt, saving you significant dollars down the line.

Instead of having to pay thousands of dollars for new pavement, it is more cost effective to spend only pennies on the dollar per square foot to maintain.

" target="_blank">https://sealmaster.net/wp-content/uploads/sealcoating-pavement-condition-index-chart2.png"/>

Unsealed vs. Sealed

" target="_blank">https://sealmaster.net/wp-content/uploads/asphalt-sealed-vs-unsealed.png"/>

What is Asphalt Pavement?

Asphalt Pavement, also known as Hot Mix, is a simple blend of two main components; Molten Liquid Asphalt (the black glue or binder), and Crushed Rock or Aggregate.

The Hot Mix is then placed and compacted to form asphalt pavement.

https://sealmaster.net/wp-content/uploads/molten-liquid-asphalt-glue-or-binder.png" width="468"/>https://sealmaster.net/wp-content/uploads/crushed-rock-or-aggregate.png" width="468"/>https://sealmaster.net/wp-content/uploads/asphalt-pavement-hot-mix-compaction.png" width="468"/>

Your Parking Lot is the Welcome Mat to Your Property.

It provides both image and functionality to business or institution. Your parking lot represents a substantial capital investment that must be maintained.

A scheduled program of pavement maintenance that includes sealcoating and crack filling will more than double the life of your asphalt pavement and provide maximum curb appeal.

Sealcoating and crack filling are a fraction of the cost of repairing or replacing asphalt pavement.

Learn More

This is a content preview space you can use to get your audience interested in what you have to say so they can’t wait to learn and read more. Pull out the most interesting detail that appears on the page and write it here.

About Us

Grab interest

Pothole Repair – Avoiding Costly Liabilities

Moisture intrusion is the leading cause of pavement deterioration. When left alone and when cracks are not repaired, potholes become evident and a safety problem. Potholes represent an annoyance to vehicle traffic and a serious tripping hazard to pedestrians.

To avoid potential liability, potholes should be filled immediately upon discovery with either SealMaster cold patch materials or hot mix material.

Filling potholes is a relatively easy and inexpensive process.

To Properly Maintain a Driveway or Parking Lot, It’s Important to Prepare the Asphalt Surface Prior to Sealcoating.

Cracks in your pavement along with pot holes and raveling not only reduce the value of your property and are un-appealing, they are also a safety issue and cause problems for visitors. With SealMaster’s large network of sealcoating and asphalt maintenance contractors, a solution to unsightly pavement can be had.

" target="_blank">https://sealmaster.net/wp-content/uploads/pothole-repair-how-to-hand-tamper.png"/>

How Do Potholes Form?

" target="_blank">https://sealmaster.net/wp-content/uploads/crack-filler-and-sealer-flow-chart-2.png"/>

Moisture Intrusion into Cracks is One of the Leading Causes of Potholes

Pavement deterioration occurs when melted snow or rainwater seep through cracks in the pavement and can’t get absorbed into the frozen ground. When the water freezes, it expands and can “pop” or weaken the asphalt. The weight of autos rolling over the weakened pavement causes chunks to break away.

FREE Pavement Inspections and Estimates

Locate Sealcoating Contractors in your Area

FIND A LOCAL CONTRACTOR" target="_blank">https://sealmaster.net/wp-content/uploads/aquaset-pothole-patch-pail.png"/>

Applications

• Asphalt road patching
• Concrete road repairs
• Pothole repairs
• Driveways, walkways and parking lots
• Utility cuts and manhole repairs
• Bridge joints

Benefits:

• Easy – pour, add water and tamp
• Durable – as hard as hot mix asphalt
• Fast & Hard – traffic-ready immediately
• Saves Money – eliminates repeat repairs
• Environmentally Friendly
• Can be sealed with a seal coat immediately after one hour cure

Advances in Pothole Repair Technology

AquaSet saves time and money while delivering a superior, permanent repair to asphalt and concrete surfaces. This cold-mix, water-activated product is environmentally friendly. It sets up quickly and is traffic-ready immediately.

Unlike other asphalt patching solutions, AquaSet provides a permanent solution, using revolutionary organic renewable additives, so you don’t have to continually repair the same trouble spot, or replace a temporary fix with a permanent solution.

Don’t let weather interfere with your production schedule. You can use AquaSet all year round, in all types of weather, hot or cold, wet or dry. Rain and moisture actually help accelerate the process. AquaSet is traffic-ready immediately after compaction, so road repairs don’t tie up traffic as long.

https://sealmaster.net/wp-content/uploads/aquaset-application-step-1.png" width="210"/>https://sealmaster.net/wp-content/uploads/aquaset-application-step-2.png" width="210"/>https://sealmaster.net/wp-content/uploads/aquaset-application-step-3.png" width="210"/>

AquaSet comes ready to use and application is quick and easy. Simply clear debris from the repair area, apply AquaSet, add water and tamp it down. Fast, easy and permanent!

AquaSet is water activated, environmentally friendly and non-toxic. No hydrocarbon leaching or evaporation.

Patching asphalt and concrete with AquaSet is as easy as it looks. Just fill in the area to repair, sprinkle with water and tamp.

AquaSet will instantly start to harden, so there’s no need to close the area to traffic once the pavement is repaired. This permanent, eco-friendly formula is safe for people, animals, and the environment.

Asphalt Pavement Patching

Severely damaged pavement requires patching using either Infrared Patching techniques, Full-Depth asphalt repair, or GatorPave.
Infrared Patching involves heating up and re-melting the damaged asphalt, raking and then compacting the asphalt to produce a “like new” asphalt patch area.
Full-Depth Asphalt Repair involves cutting out and removing the damaged asphalt, repairing the base and replacing with fresh hot mix asphalt. Full-depth asphalt repair typically provides better long-term results.
SealMaster GatorPave is a polymer-modified, fiber reinforced asphalt emulsion fortified with select aggregate. It is designed for patching cracked and alligatored pavement. GatorPave is both economical and easy to use.

https://sealmaster.net/wp-content/uploads/unsealed-asphalt-repair.png"/> src="" target="_blank">https://sealmaster.net/wp-content/uploads/sealmaster-gatorpave-crack-filling-application.png"/>

SealMaster® offers a full line of oil spot primers for sealing oil, gas and grease spots on asphalt pavement, and high-quality asphalt emulsion tack coats for use in priming asphalt surfaces, prior to patching or resurfacing.

When the work is done, SealMaster® makes clean-up easy with our line of specialty cleaners designed for the removal of coal tar and asphalt pavement sealers from tools, equipment, vehicles and other surfaces.

Generate excitement

What's something exciting your business offers? Say it here.

Close the deal

Give customers a reason to do business with you.